| Technical Data Sheets & Material Safety Data Sheets | ||
| HT-300® Polyiso Insulation | Tech. Data Sheet - PDF(215KB) | MSDS - PDF(108KB) |
| HT-303 Polyiso Insulation | Tech. Data Sheet - PDF(214KB) | MSDS - PDG(108KB) |
| HT-304 Polyiso Insulation | Tech. Data Sheet - PDF(214KB) | MSDS - PDF(108KB) |
| HT-306 Polyiso Insulation | Tech. Data Sheet - PDF(214KB) | MSDS - PDF(108KB) |
| HT-450® Polyiso Insulation | Tech. Data Sheet - PDF(616KB) | MSDS - PDF(107KB) |
| Thickness Tables |
| HT-300® for Condensation Control | ||||||
| Location | Ambient Temp.°F | Rel. Humidity | Wind Speed | Geometry | Emissivity | Charts |
| Indoor | 80°F | 70% | 0 mph | Horizontal | 0.9 | View Chart |
| Indoor | 80°F | 80% | 0 mph | Horizontal | 0.9 | View Chart |
| Outdoor | 80°F | 80% | 8 mph | Horizontal | 0.1 | View Chart |
| Outdoor | 80°F | 80% | 8 mph | Horizontal | 0.9 | View Chart |
| HT-300® Heat Loss at 8 BTU/Hour-ft2 | ||||||
| Location | Ambient Temp.°F | Rel. Humidity | Wind Speed | Geometry | Emissivity | Charts |
| Indoor | 80°F | 80% | 0 mph | Horizontal | 0.9 | View Chart |
| Outdoor | 80°F | 80% | 8 mph | Horizontal | 0.1 | View Chart |
| Outdoor | 80°F | 80% | 8 mph | Horizontal | 0.9 | View Chart |
| Please Note: These tables are for reference only and only show thickness required for these specific ambient conditions. We do not recommend using these calculations on a "per job" basis. If you wish to have thickness calculated for a job, please fill out this simple calculation form or contact us and we will run the calculations and return them to the email address provided within 24 hours. Thank you. |
| Specifications |
| HT-300® Specifications* | Type (File Size) | Type (File Size) |
| HiTHERM HT-300 for Cryogenics Applications | Coming Soon | Coming Soon |
| HiTHERM HT-300 for Refrigeration Applications | PDF (192KB) | Word (66KB) |
| HiTHERM HT-300 for Chilled Water | PDF (193KB) | Word (66KB) |
| HiTHERM HT-300 for Hot Water | PDF (193KB) | Word (66KB) |
| HT-450® Specifications* | Type (File Size) | Type (File Size) |
| HiTHERM HT-450 for Low Pressure Steam | PDF (185KB) | Word (59KB) |
| HiTHERM HT-450 for Medium-High Pressure Steam | PDF (185KB) | Word (59KB) |
| *These specifications are offered as a guide for the purpose described herein. No warranty of procedures, either expressed or implied is intended. All other express or implied warranties of merchantability or fitness for a particular purpose are disclaimed. Please confirm that you are meeting all local and state building codes. |
| Installation Guidelines |
| HT-300® Guidelines* | Type (File Size) |
| HiTHERM HT-300 for Cryogenic Applications | Coming Soon |
| HiTHERM HT-300 for Refrigeration | Coming Soon |
| HiTHERM HT-300 for Chilled Water | PDF(511Kb) |
| HiTHERM HT-300 for Hot Applications | PDF(504Kb) |
| HT-450® Guidelines* | Type (File Size) |
| HiTHERM HT-450 for Low Pressure Steam | PDF(500Kb) |
| HiTHERM HT-450 for Medium-High Pressure Steam | PDF(500Kb) |
| *These guidelines are offered as a guide for the purpose described herein. No warranty of procedures, either expressed or implied is intended. All other express or implied warranties of merchantability or fitness for a particular purpose are disclaimed. |